/SELECTION GUIDE
INSULATED CABLE STRIPPING TOOLS
Outils principalement conçus pour la préparation de câbles isolés de réseaux de distribution et de transport d'electricité ayant des conducteurs de classe 1 & 2.
Tools primarily designed for the preparation of insulated cables for electricity distribution and transmission networks with class 1 & 2 conductors.
Werkzeuge, die hauptsächlich für die Vorbereitung von isolierten Kabeln für Stromverteilungs- und -transportnetze mit Leitern der Klassen 1 und 2 entwickelt wurden.
Herramientas diseñadas principalmente para la preparación de cables aislados de redes de distribución y transporte de electricidad con conductores de clase 1 y 2.
Utensili progettati principalmente per la preparazione di cavi isolati di reti di distribuzione e trasporto dell'energia elettrica con conduttori di classe 1 e 2.
Cette application est conçue pour vous aider à affiner votre choix parmi une sélection de produits, mais ne remplace pas une analyse personnalisée ou un conseil expert. Les informations, recommandations et sélections de produits présentées sur la présente application sont fournies à titre purement informatif.

PENTA ne garantit ni l’adéquation des produits proposés aux besoins spécifiques de l’utilisateur, ni leur conformité à l’usage particulier auquel celui-ci les destine. Il appartient exclusivement à l’utilisateur de vérifier, préalablement à toute commande ou utilisation, la compatibilité du produit avec ses besoins, contraintes techniques, réglementaires et opérationnelles.

En conséquence, la responsabilité de PENTA ne saurait être engagée au titre d’un choix de produit inadapté, d’une erreur d’appréciation, d’une mauvaise utilisation du produit ou de toute conséquence dommageable en résultant.

Les Conditions Générales de vente figurant sur le site de PENTA sont applicables à toute commande de produits.
This application is designed to help you refine your choice from a selection of products, but does not replace a personalised analysis or expert advice. The information, recommendations and product selections presented on this application are provided for informational purposes only.

PENTA does not guarantee that the products offered are suitable for the user's specific needs or that they are suitable for the particular use for which the user intends them. It is the sole responsibility of the user to verify, prior to any order or use, that the product is compatible with their needs and technical, regulatory and operational constraints.

Consequently, PENTA cannot be held liable for any unsuitable product choice, error of judgement, misuse of the product or any resulting damage.

The General Terms and Conditions of Sale appearing on the PENTA website apply to all product orders.
Diese Anwendung dient dazu, Ihnen bei der Verfeinerung Ihrer Auswahl aus einer Produktauswahl zu helfen, ersetzt jedoch keine individuelle Analyse oder fachkundige Beratung.Die in dieser Anwendung dargestellten Informationen, Empfehlungen und Produktauswahlen dienen ausschließlich Informationszwecken.

PENTA übernimmt weder eine Gewähr für die Eignung der angebotenen Produkte für die spezifischen Bedürfnisse des Nutzers noch für deren Übereinstimmung mit dem jeweiligen Verwendungszweck. Es obliegt ausschließlich dem Nutzer, vor jeder Bestellung oder Verwendung die Kompatibilität des Produkts mit seinen Anforderungen sowie mit technischen, regulatorischen und betrieblichen Vorgaben zu prüfen.

Folglich kann die Haftung von PENTA weder aufgrund einer ungeeigneten Produktauswahl noch wegen eines Beurteilungsfehlers, einer unsachgemäßen Verwendung des Produkts oder daraus resultierender Schäden geltend gemacht werden.

Die auf der Website von PENTA veröffentlichten Allgemeinen Verkaufsbedingungen gelten für jede Produktbestellung.
Esta aplicación está diseñada para ayudarle a afinar su elección entre una selección de productos, pero no sustituye un análisis personalizado ni un asesoramiento experto. La información, recomendaciones y selecciones de productos presentadas en la presente aplicación se proporcionan únicamente con fines informativos.

PENTA no garantiza ni la adecuación de los productos propuestos a las necesidades específicas del usuario ni su conformidad con el uso particular al que este los destine. Corresponde exclusivamente al usuario verificar, antes de cualquier pedido o utilización, la compatibilidad del producto con sus necesidades, requisitos técnicos, normativos y operativos.

En consecuencia, la responsabilidad de PENTA no podrá ser exigida por una elección de producto inadecuada, un error de apreciación, un uso indebido del producto o cualquier consecuencia perjudicial derivada de ello.

Las Condiciones Generales de Venta que figuran en el página web de PENTA son aplicables a cualquier pedido de productos.
La presente applicazione è concepita per aiutarvi ad affinare la vostra scelta tra una selezione di prodotti, ma non sostituisce un’analisi personalizzata né una consulenza specialistica. Le informazioni, raccomandazioni e selezioni di prodotti presentate nella presente applicazione sono fornite a titolo puramente informativo.

PENTA non garantisce né l’idoneità dei prodotti proposti alle esigenze specifiche dell’utente né la loro conformità all’uso particolare cui questi intende destinarli. Spetta esclusivamente all’utente verificare, prima di qualsiasi ordine o utilizzo, la compatibilità del prodotto con le proprie esigenze, requisiti tecnici, normativi e operativi.

Di conseguenza, PENTA declina ogni responsabilità di PENTA in caso di scelta di prodotto inadeguata, errore di valutazione, uso improprio del prodotto o qualsiasi conseguenza dannosa che ne derivi.

Le Condizioni Generali di Vendita pubblicate sul sito di PENTA si applicano a qualsiasi ordine di prodotti.
ENTER
RETURN TO
underground insulated cables
overhead insulated cables

PG3HTA

PG4HTA

PG5HTA

LOW VOLTAGE (LV)
MEDIUM VOLTAGE (MV)
HIGH VOLTAGE (HV)
INSTALLATION
ROUTINE TEST
LABORATORY
LOW VOLTAGE (LV)
MEDIUM VOLTAGE (MV)
INSULATED / HYBRID TOOLS  
1000V IEC 60900
NON INSULATED TOOLS
SINGLE-CORE CABLE
MULTI-CORE CABLE
STEEL TAPE ARMORED
STEEL WIRE ARMORED
WITHOUT ARMOR
ALUMINIUM FOIL SCREEN
COPPER WIRED SCREEN
FOIL
WIRE
STRIPPABLE SEMICONDUCTOR
(EASY-PEEL)
BONDED SEMICONDUCTOR
(VULCANIZED)
UNKNOWN SEMICONDUCTOR TYPE
When the cable is referred to as “strippable”, the external semiconductor can be presented like a banana peel. To remove it during the preparation of a cable for a joint or termination, the external semiconductor can be incised and, only afterward, peeled off from the insulation, just like peeling a banana.
When the cable is referred to as “non-strippable”, the external semiconductor can be presented like an apple peel. To remove it, the external semiconductor can thus be “peeled” like the skin of an apple.
/ UNDERGROUND / MV / INSULATED & HYBRID TOOLS 1000V IEC 60900 / SINGLECORE CABLE WITH COPPER WIRE SCREEN & BONDED SEMICON
  
/ UNDERGROUND / MV /
  
/ UNDERGROUND / MV /
/ UNDERGROUND / MV /
/ UNDERGROUND / MV /
/ OVERHEAD CABLE / MV / TREE WIRE & SPACER CABLE
  
/ OVERHEAD CABLE / MV /
 SHEATHED BRIDGE CABLE

  
Overhead line
Overhead line
Sheathed bridge
Sheathed bridge
/ OVERHEAD CABLE / LV /
  
/ LOW VOLTAGE UNDERGROUND SINGLECORE CABLE
  
/ LOW VOLTAGE UNDERGROUND MULTICORE CABLE
  
/ LOW VOLTAGE UNDERGROUND MULTICORE CABLE
  
/ UNDERGROUND / HV / SINGLECORE CABLE /
  
/UNDERGROUND - MEDIUM VOLTAGE
  MULTI-CORE - STEEL WIRE ARMOR
  COPPER WIRE SCREEN
  
/UNDERGROUND - MEDIUM VOLTAGE
  MULTI-CORE - STEEL TAPE ARMOR
  COPPER WIRE SCREEN
  
Outer sheath removal tool
/ PGHTA SERIE
  
Ø Min 26 mm / Ø Max 75 mm
/ PRG SERIE
  
Ø Min 26 mm / Ø Max 75 mm
/ MF2 SERIE
  
Ø Min 16 mm / Ø Max 63 mm
/ MF3 SERIE
  
Ø Min 16 mm / Ø Max 58 mm
Outer sheath removal tool
/ PGHTA SERIE
  
Ø Min 26 mm / Ø Max 75 mm
/ PRG SERIE
  
Ø Min 26 mm / Ø Max 75 mm
/ MF2 SERIE
  
Ø Min 16 mm / Ø Max 63 mm
/ MF3NP SERIE
  
Ø Min 16 mm / Ø Max 58 mm
Outer sheath removal tool
/ PGHTA SERIE
  
Ø Min 26 mm / Ø Max 75 mm
/ PRG SERIE
  
Ø Min 26 mm / Ø Max 75 mm
/ MF2 SERIE
  
Ø Min 16 mm / Ø Max 63 mm
/ MF3NP SERIE
  
Ø Min 16 mm / Ø Max 58 mm
/ MF3 SERIE
  
Ø Min 16 mm / Ø Max 58 mm
HV cable stripping tool / Installation
/ CAMF SERIE
  
Ø Min 40 mm / Ø Max 180 mm
/ DM SERIE
  
Ø Min 50 mm / Ø Max 145 mm
/ DMSR SERIE
  
Ø Min 40 mm / Ø Max 160 mm
/ EV/HTB
  
Ø Min 0 mm / Ø Max 240 mm
/ EGA
  
Ø Min 0 mm / Ø Max 240 mm
HV cable stripping tool / Laboratory
/ CAMF SERIE
  
Ø Min 40 mm / Ø Max 180 mm
/ DM SERIE
  
Ø Min 50 mm / Ø Max 145 mm
/ DMSR SERIE
  
Ø Min 40 mm / Ø Max 160 mm
/ AMSI SERIE
  
Ø Min 15 mm / Ø Max 165 mm
/ GECL SERIE
  
Ø Min 20 mm / Ø Max 200 mm
/ EV/HTB
  
Ø Min 0 mm / Ø Max 240 mm
/ EGA
  
Ø Min 0 mm / Ø Max 240 mm
HV cable stripping tool / Routine test
/ CAMF SERIE
  
Ø Min 40 mm / Ø Max 180 mm
/ AMSI SERIE
  
Ø Min 15 mm / Ø Max 165 mm
/ EV/HTB
  
Ø Min 0 mm / Ø Max 240 mm
/ EGA
  
Ø Min 0 mm / Ø Max 240 mm
Outer sheath removal tool
/ PINTEL4BT/R SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ PINTEL4BT SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ J1R SERIE
  
Ø Min 6 mm / Ø Max 21 mm
/ DBT
  
Ø Min 7.5 mm / Ø Max 18 mm
Outer sheath removal tool
/ PINTEL4BT/R SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ PINTEL4BT SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ J1R SERIE
  
Ø Min 6 mm / Ø Max 21 mm
/ PGBT SERIE
  
Ø Min 8 mm / Ø Max 52 mm
/ OSO-1000V
  
Ø Min 25 mm / Ø Max 200 mm
/ OGA
  
Ø Min 20 mm / Ø Max 200 mm
Outer sheath removal tool
/ PINTEL4BT/R SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ PINTEL4BT SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ J1R SERIE
  
Ø Min 6 mm / Ø Max 21 mm
/ PGBT SERIE
  
Ø Min 8 mm / Ø Max 52 mm
Outer sheath removal tool / 1000V
/ PINTEL4BT/R-1000V SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ PINTEL4EC SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ PINTEL4BT/1000V SERIE
  
Ø Min 10 mm / Ø Max 30 mm
Outer sheath removal tool / 1000V
/ PINTEL4BT/R-1000V SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ PINTEL4EC SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ PINTEL4BT/1000V SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ OSO-1000V
  
Ø Min 25 mm / Ø Max 200 mm
/ PG3EC SERIE
  
Ø Min 10 mm / Ø Max 30 mm
/ PG3EW SERIE
  
Ø Min 26 mm / Ø Max 52 mm
Outer sheath & semicon removal tool
/ DPC
  
Ø Min 10 mm / Ø Max 45 mm
Outer sheath removal tool
/ DCG
  
Ø Min 10 mm / Ø Max 45 mm
Outer sheath removal tool
/ OSO-1000V  
Ø Min 25 mm / Ø Max 200 mm
/ PGHTA SERIE
  
/ PRG SERIE
  
Ø Min 47 mm / Ø Max 95 mm
Ø Min 47 mm / Ø Max 75 mm
/ OGA
  
Ø Min 20 mm / Ø Max 200 mm
BONDED
STRIPPABLE
      This category filters the most suitable tools that
enable the user to remove bonded semiconductor.
      This category filters the most suitable tools that
enable the user to remove strippable semiconductor.
Semiconductor removal tool
Strippable semicon removal tool
/ CWE / 14-50-MVS 
Ø Min 14 mm / Ø Max 50 mm
/ ORACL
  
Ø Min 10 mm / Ø Max 100 mm
/ LHMR SERIE
  
Ø Min 14 mm / Ø Max 60 mm
/ MF3 SERIE
  
Ø Min 16 mm / Ø Max 58 mm
/ DSP
  
Ø Min 10 mm / Ø Max 80 mm
Bonded semicon removal tool
/ BSC SERIE
  
Ø Min 14 mm / Ø Max 44 mm
/ CWB SERIE
  
Ø Min 12 mm / Ø Max 60 mm
/ MF3NP SERIE
  
Ø Min 16 mm / Ø Max 58 mm
/ GRI SERIE
  
Ø Min 15 mm / Ø Max 240mm
Semicon removal tool
/ CWE / 14-50-MVS 
Ø Min 14 mm / Ø Max 50 mm
/ ORACL
  
Ø Min 10 mm / Ø Max 100 mm
/ LHMR SERIE
  
Ø Min 14 mm / Ø Max 60 mm
/ MF3 SERIE
  
Ø Min 16 mm / Ø Max 58 mm
/ DSP
  
Ø Min 10 mm / Ø Max 80 mm
/ BSC SERIE
  
Ø Min 18 mm / Ø Max 60 mm
/ CWB SERIE
  
Ø Min 12 mm / Ø Max 60 mm
/ MF3NP SERIE
  
Ø Min 16 mm / Ø Max 58 mm
/ GRI SERIE
  
Ø Min 15 mm / Ø Max 240mm
Aluminium screen tool
/ ALROC-FENTE
  
Ø Min 16 mm / Ø Max 60 mm
/ EV/NPT
  
Section Min 16 mm² / Max 240 mm²
/ ROTO-TMG
  
Ø Min 16 mm / Ø Max 60 mm
/ GFE-TMG
  
Ø Min 16 mm / Ø Max 60 mm
Copper wire screen tool
/ CIS-KEV
  
Max Ø : 3 mm strands
Foil screen tool / 1000V
/ SBI
  
Ø Min 0 mm / Ø Max 200 mm
Foil screen tool
/ PEF
  
Ø Min 0 mm / Ø Max 25 mm
Copper foil screen tool
/ CFS SERIE
  
Ø Min -- mm / Ø Max -- mm
Steel tape armor tool
/ SBA
  
Ø Min 0 mm / Ø Max 200mm
/ Q99
  
Ø Min 0 mm / Ø Max 200mm
Steel wire armor tool
/ SBA
  
Ø Min 0 mm / Ø Max 200mm
Wire screen tool
/ SBI
  
Ø Min 0 mm / Ø Max 200mm
Wire screen tool
/ SBA
  
Ø Min 0 mm / Ø Max 200mm
Insulation removal tool
/ MF2 SERIE
  
Ø Min 16 mm / Ø Max 63 mm
/ BRMRD1E
  
Ø Min 14 mm / Ø Max 40 mm
/ CWI SERIE
  
Ø Min 13 mm / Ø Max 38 mm
/ MF3 SERIE
  
Ø Min 16 mm / Ø Max 58 mm
Insulation removal tool
/ MF2 SERIE
  
Ø Min 16 mm / Ø Max 63 mm
/ BRMRD1E
  
Ø Min 14 mm / Ø Max 40 mm
/ CWI SERIE
  
Ø Min 13 mm / Ø Max 38 mm
/ MF3NP SERIE
  
Ø Min 16 mm / Ø Max 58 mm
Insulation removal tool
/ MF2 SERIE
  
Ø Min 16 mm / Ø Max 63 mm
/ BRMRD1E
  
Ø Min 14 mm / Ø Max 40 mm
/ CWI SERIE
  
Ø Min 13 mm / Ø Max 38 mm
/ MF3NP SERIE
  
Ø Min 16 mm / Ø Max 58 mm
/ MF3 SERIE
  
Ø Min 16 mm / Ø Max 58 mm

PGHTA SERIE / Outer sheath removal. MV.

safe and easy to use
cutting depth control

WHICH TOOL SIZE FOR WHICH CABLE DIAMETER?

MF2 SERIE / Multifunction tool : Outer sheath / insulation. MV.

Multitool: sheath & insulation
Straight cut of the sheath stop and insulation
Tool Feed Adjustment feature
Robust design

WHICH TOOL SIZE FOR WHICH CABLE DIAMETER?

PGBT SERIE / Sheath removal. LV.

safer than a knife
cutting depth control

WHICH TOOL SIZE FOR WHICH CABLE DIAMETER?

2 cable sections in a single tool. (54 & 148 mm² or 54 & 70 mm²)
Preset cutting depth
Adjustable cutting length

DCG SERIE / Sheath removal of insulated bridge overhead cable. MV.

WHICH TOOL FOR WHICH CABLE SECTION?

J1R SERIE / Sheath removal of ABC cables. LV.

Compatible with all twisted aerial cables
No cutting depth adjustment required
Can be motorised for easy operation

ALROC-FENTE SERIE / To slit the sheath and the aluminum screen. MV.

easy to use
cutting depth control
assisted tool positioning

WHICH TOOL SIZE FOR WHICH CABLE DIAMETER?

PRG SERIE / Outer sheath removal. MV.

faster and safer than knife
2 Interchangeable heads: PRG3, PRG4
quick adjustment of the longitudinal cutting depth
VIDEO COMING SOON

WHICH TOOL SIZE FOR WHICH CABLE DIAMETER?

AMSI SERIE / Multifunction tool: Bonded semicon & insulation. MV. HV.

lightweight
quick adjustment
easy to use

WHICH TOOL SIZE FOR WHICH CABLE DIAMETER?

/TYPE OF CABLE
AERIAL
/VOLTAGE LEVEL
MEDIUM VOLTAGE
/TYPE OF TOOLS
INSULATED
/NUMBER OF CONDUCTOR(S)
SINGLE-CORE
/TYPE OF ARMORING
STEEL TAPE ARMORED
/TYPE OF SCREEN
FOIL
/SEMICONDUCTOR
STRIPPABLE
/USER APPLICATION
INSTALLATION